Many people ask how to open a can without a can opener? In this article, we will show you the top 10 most useful ways to open a can without a can opener.
Canned good is a valuable item in our daily life. It saves a lot of time because of its durability and availability. However, most can items have an easy-open tab to open the lids on the can. Besides, you can find yourself in a situation where the tab has broken off, or you don’t have a can opener. In that case, how would you open a can without a can opener?
We have wrapped up some of the creative can-opening ideas. These ideas will make your life easy. So, let’s jump into it.
10 Best Ways to Open a Can Without a Can Opener
Method 1: Using Axe to Open a Can
Step-1
First, put the can horizontally on a flat base.
Step- 2
Now, take an axe and hold put the tip right on the neck of the can lid.
Step- 3
Then, gently put pressure on the can. You will see the axe will cut through the can.
Step- 4
Follow this way, and you will cut through the whole can.
Step- 5
After cutting 75% of the can, pry the lid with the axe.
Method 2: Using a Big Knife to Open a Can
Step-1
First, put the can horizontally on a flat base.
Step-2
Then, take a big knife. Put the tip of the blade right under the can lid.
Step-3
Now, smack on the grip of the knife. The tip of the blade will go through the can.
Step-4
After that, put the blade’s sharp edge horizontally on the can. Gently put pressure on the knife. And slice through the can with the knife.
Step- 5
Eventually, the pressure will cut through the whole can. Pry the lid of the can with the knife. And enjoy your food.
Method 3: Chef’s Knife:
Step 1:
First, Take a can and put it vertically on a flat base. Do not follow this method while placing the can on your lap or holding the can. It can cause serious injury.
Step 2:
After this, take a chef’s knife and place the hill of the blade on the edge of the can lid. Make sure to hold the knife with a firm grip.
Step- 3:
Now, carefully press down the can’s lid with the hill of the knife. And make a hole on the top.
Step- 4
Repeat this process through the whole can lid. After this, pry the can lid with a knife and reveal your food.
Method 4: Using Spoon to Open a Can
Step- 1:
First, take a can and put it on a flat base.
Step- 2:
Take a spoon and hold it with a firm grip. Place the edge on the inside edge of the can lid. Each can have an edge lip raised above the lid.
Step-3:
Then, rub the spoon tip back and forth on a small area. This friction will make a hole through the lid.
Step- 4
After that, keep pressuring through the lid. This process will make the hole on the top look big.
Step- 5:
Then, dig your spoon through the lid and push the top upward until it pops out of its palace. Take the cover off and reveal the food.
Method 5: Using Fork to Open a Can
Step-1:
Take a can and place it on a flat base.
Step- 2:
Now, grab a fork. Then, put one tip on the rim of the can.
Step- 3:
Then, gently put pressure on the fork to make a hole in the cover.
Step- 4:
Keep repeating this step. Eventually, it will make a hole throughout the lid.
Step- 5:
Now, take the fork in reverse and put it through one hole. Then push the lid upward until the hole opens widely.
Step- 6:
After that, the food is ready to serve.
Method 6: Using Rock or Concrete to Open a Can
Step- 1
Firstly, find a concrete block or flatten rock. Now look for a rough edge.
Step- 2
Then, take the can and place it on the rough edge of the rock upside down.
Step- 3
After that, rub the can back and forth to create friction between the can and the rock. This rubbing will break the seal located on the top of the lid.
Step- 4:
While rubbing, look for moisture on the floor of the rock. You will understand that the lid is thin enough to open.
Step- 5:
Then, put the can on your hand and put pressure on both sides of the can. This pressure will make the lid pop out of its place.
Step- 6
After that, take the lid off and serve your food.
Method 7: Using Metal File to Open a Can
Step-1
Take a can and place it on a table.
Step- 2
Then, take a metal file and place it on the top of the cover.
Step- 3
After that, rub the metal file back and forth to create friction between the can and the file.
Step- 4
Rubbing the metal file will thin out the cover. After a while, put pressure on both sides of the can with your fingers.
Step- 5
The lid will pop upward, and you can serve the food.
Remember that rubbing with a metal file can create small metal flakes. Try to clean the top before opening the cover. These tiny metal flakes can harm your health.
Method 8: Using Flat-Nose Pliers to Open a Can
Step- 1
Take a can and place it on a table.
Step-2
Then, grab flat-nose pliers. Gently press against the rim of the can and break the sides.
Step- 3
Repeat this process and break the rim. After a while, the cover will come off.
Step-4
Take the cover off. And, you can serve your food.
Method 9: Using Tin Snips to Open a Can
Step- 1
Grab tin snips and place a can on a table.
Step- 2
Now, cut through the edge of the rim. Keep repeating until the rim of the can is entirely broken.
Step- 3
Then, take the rim off, and the food is ready to serve.
Method 10: Using Both Hands to Open a Can
For Big Cans:
Step- 1
Take a can and place it sideways inside your palm.
Step- 2
Then, place fingers of hands on the middle point of the can. Now, increase pressure on your fingertip to create a dent in the can.
Step- 3
After creating a dent on one side, flip the can and repeat step 2.
Step- 4
After creating dents on both sides of the can, place the can sideways again inside your palm. Now interlock fingers of both hands. And put pressure from both sides.
Step- 5
Then use your pectoral muscle to put pressure on the can. It will crush the can body. And after a while, break from the dent that you created.
For Small Cans:
Step- 1
Grab a small can, and same as a big can put it sideways inside your palm.
Step- 2
Hold the can with one hand and place the fingers on the middle point of the can. Put pressure on the can against your chest.
Step- 3
Then, repeat this process and create multiple dents along the body.
Step- 4
After that, place the can inside your palm. Then, inter-lock the fingers and press with both palms. Repeat this process until the outside of the can is entirely crushed.
Step- 5
Now put the can inside a polythene bag so the food does not spill all over. Again, start pressing with the palm of both hands. After a while, the can will break from its body.
Step- 6
Now, put your finger through the crack. And pull outwards to open the can from the break.
These are some common ways to open a can without a can opener. For more life hacks-related content, keep visiting Blogsur.com.
Picture and Video Tutorial Credit Mr. Hacker
